Kā lietot augstas temperatūras veidņu temperatūras regulatoru
Augstas temperatūras veidņu temperatūras regulatoru parasti iedala augstas temperatūras eļļas temperatūras regulatorā un augstas temperatūras ūdens temperatūras regulatorā. Anyda augstas temperatūras veidņu temperatūras regulators izmanto uzlabotas sastāvdaļas, zema enerģijas patēriņa ūdens sūkni/eļļas sūkni, ilgu kalpošanas laiku, zemu trokšņa līmeni, mazu vibrāciju, ātru sildīšanas un dzesēšanas ātrumu, precīza un stabila temperatūra, unikālā dubultā{0}} jaudas sildīšanas dizains ir piemērots lietošanai dažādās temperatūras-kontrolējamās vietās, un tas ir pilnībā rūsas-necaurlaidīgs un pret-korozijas apstrāde, kas ir droša un ilgstoša{4}} . Tā ir jūsu labākā izvēle. Tad kā izmantot augstas temperatūras veidņu temperatūras mašīnu? Nāciet un pārbaudiet to kopā ar mani.
Step 1: Check and set before the test machine, and check whether the oil, electricity, gas and pipeline of the mold temperature machine are normal.
Step 2, start the oil pump and check whether the steering of the oil pump and the rotation of the fan are correct, and then make sure that the fan and the oil pump can operate normally.
Step 3, refuel. The heat transfer oil is added to the oil tank of the expansion tank, and the heat transfer oil is input into each part of the oil carrier body through the heat transfer oil circulation, and then the mechanical operation is carried out.
The fourth step is to observe during the work, whether there is leakage of gas, whether there is leakage in the pipeline, and at the same time, we also need to determine whether the pressure is normal during the operation of the mold temperature machine.











